The normal battery voltage is 12.7 V (100 charge).
Operating Temperature: 14F-113F (-10C-45C) First of all, in any battery, you need to measure the voltage at the battery terminals. For instance, a 12-volt lead acid battery will deliver about 12.7 volts when fully charged, but only about 11.6 volts at 20 capacity. 1.1M power cable, 1.2M cable with insulated battery clamps. Replacement output fuse: F10AL250V or T10AL250V (5x20 mm)Īutomatic multi-rate charging CC/CV profile with Pre-charge (between 2v-10v) 98% efficiency.ĭimensions: 4.45” x 2.36” x 3.39” (113 x 60 x 86mm) Zero volt minimum battery start up- can charge a completely flat battery. With the engine off, the fully charged car battery voltage will measure 12.6 volts. This updated charger now comes with an SAE quick disconnect end, along with a ring terminal harness and standard battery clamps for more charging solutions in a variety of vehicles, bikes, etc. 75-amp Engine Start Use for delivering up to 75 amps to a 12-volt. In the case that a Braille lithium battery is every fully discharged (10 volts is considered 0% state of charge on a 12v lithium battery), this charger does have a 'pre-charge/revival mode' that will do a slow 'pulse charge' as long as the battery has at least 2 volts (to know that it is connected to a battery) and will slowly bring it back up to 10 volts before charging at the standard 6 Amp rate back up to full. So 12v battery contains 6 cells so it’ll be 14.4-14.7 voltage Absorption Stage: When the battery is 80 charged is known as the absorption stage. drops, the Battery Charger will come on again, keeping the battery fully charged. Braille 12v 6A lithium charger/maintainer charges at a reasonably quick 6 Amps and is designed to maintain and keep Braille lithium batteries fully charged when not in use or sitting for long periods of time.
0 kommentar(er)
